Commission Regulation (EU) No 1089/2010 of 23 November 2010 implementing Directive 2007/2/EC of the European Parliament and of the Council as regards interoperability of spatial data sets and services
Boeretang 200
Belgium
VITO
Imagery Base Maps Earth Cover
The product original source is the PROBA-V mission and has been produced by VITO, see also https://doi.org/10.5270/PRV-2vvxhtt.A Level2A product contains the projected Level1C (Pâproduct) data, i.e. radiometrically and geometrically corrected TOA reflectance values projected on a uniform grid, given per band/camera. The applied coordinate reference system is the âGeographic Lat/Lonâ (EPSG:4326) projection with a spatial resolution of 1 km.
PROBA-V L2A 1KM ANTARCTICA COG: 1KM projected segment data covering Antarctica, COG format - Collection 1
PROBA-V Level2A segments contain the Level1C data projected on a uniform 1 km grid. A PROBA-V Level2A product contains the following datasets: (1) Top Of Atmosphere reflectance in the four spectral bands corresponding to the selected measurement, without atmospheric correction being performed, (2) Geometric viewing conditions, (3) Information on the status map (containing identification of radiometric quality, snow, ice, cloud shadow, clouds, land/sea for every pixel). The datasets are resampled to a fixed grid in the Plate CarrÃ©e (equidistant) projection (EPSG:4326) at 1 km spatial resolution. More info can be found in https://doi.org/10.5270/PRV-2vvxhtt.
EARTH SCIENCE>SPECTRAL/ENGINEERING>VISIBLE WAVELENGTHS
Proba-V
VGT-P
PROBA-V
VGT
space
Orthoimagery
remote sensing
Optical
proba
COG

Commission Regulation (EU) No 1089/2010 of 23 November 2010 implementing Directive 2007/2/EC of the European Parliament and of the Council as regards interoperability of spatial data sets and services
Boeretang 200
Belgium
VITO
Imagery Base Maps Earth Cover
The product original source is the PROBA-V mission and has been produced by VITO, see also https://doi.org/10.5270/PRV-2vvxhtt.A Level2A product contains the projected Level1C (Pâproduct) data, i.e. radiometrically and geometrically corrected TOA reflectance values projected on a uniform grid, given per band/camera. The applied coordinate reference system is the âGeographic Lat/Lonâ (EPSG:4326) projection with a spatial resolution of 1 km.
PROBA-V L2A 1KM COG: 1KM projected segment data, COG format - Collection 2
PROBA-V Level2A segments contain the Level1C data projected on a uniform 1 km grid. A PROBA-V Level2A product contains the following datasets: (1) Top Of Atmosphere reflectance in the four spectral bands corresponding to the selected measurement, without atmospheric correction being performed, (2) Geometric viewing conditions, (3) Information on the status map (containing identification of radiometric quality, snow, ice, cloud shadow, clouds, land/sea for every pixel). The datasets are resampled to a fixed grid in the Plate CarrÃ©e (equidistant) projection (EPSG:4326) at 1 km spatial resolution. More info can be found in https://doi.org/10.5270/PRV-2vvxhtt.
EARTH SCIENCE>SPECTRAL/ENGINEERING>VISIBLE WAVELENGTHS
Proba-V
VGT-P
PROBA-V
VGT
space
Orthoimagery
remote sensing
Optical
proba
COG

Commission Regulation (EU) No 1089/2010 of 23 November 2010 implementing Directive 2007/2/EC of the European Parliament and of the Council as regards interoperability of spatial data sets and services
Boeretang 200
Belgium
VITO
Imagery Base Maps Earth Cover
A Level2A product contains the projected Level1C (Pâproduct) data, i.e. radiometrically and geometrically corrected TOA reflectance values projected on a uniform grid, given per band/camera. The applied coordinate reference system is the âGeographic Lat/Lonâ (EPSG:4326) projection with a spatial resolution of 1 km.
PROBA-V L2A 1KM HDF: 1KM projected segment data, HDF format - Collection 2
PROBA-V Level2A segments contain the Level1C data projected on a uniform 1 km grid. A PROBA-V Level2A product contains the following datasets: (1) Top Of Atmosphere reflectance in the four spectral bands corresponding to the selected measurement, without atmospheric correction being performed, (2) Geometric viewing conditions, (3) Information on the status map (containing identification of radiometric quality, snow, ice, cloud shadow, clouds, land/sea for every pixel). The datasets are resampled to a fixed grid in the Plate CarrÃ©e (equidistant) projection (EPSG:4326) at 1 km spatial resolution. More info can be found in https://doi.org/10.5270/PRV-2vvxhtt.
EARTH SCIENCE>SPECTRAL/ENGINEERING>VISIBLE WAVELENGTHS
Proba-V
VGT-P
PROBA-V
VGT
space
Orthoimagery
remote sensing
Optical
proba
HDF

See the referenced specification
Environment
Level 3 data products are variables mapped on uniform space-time grid scales and are the result of combining multiple scenes (e.g. S1/S5/S10) to cover the userâs region of interest.
PROBA-V S5 TOC 100 m COG: Data corrected for atmospheric effects with the SMAC (Simplified Method for Atmosheric Corrections) algorithm, COG format - Collection 2
PROBA-V Level3 Top Of Canopy (atmosheric corrections applied) daily synthesis product at 100 m spatial resolution containing:(1) Top Of Canopy (ground surface) reflectance in the four spectral bands corresponding to the selected measurement, the atmospheric correction being performed using the SMAC procedure,(2) Normalized Difference Vegetation Index (NDVI). Other quantities derived from the surface reflectance are preserved, (3) Geometric viewing conditions, (4) Reference to date and time of the selected measurements, (5) Information on the composite status map (containing identification of snow, ice, shadow, clouds, land/sea for every pixel). The datasets are resampled to a fixed grid in the Plate CarrÃ©e (equidistant) projection at 100 m spatial resolution. For more information see https://doi.org/10.5270/PRV-7dte3c2
EARTH SCIENCE>LAND SURFACE>LAND USE/LAND COVER
EARTH SCIENCE>ATMOSPHERE>CLOUDS
EARTH SCIENCE>CLIMATE INDICATORS>CRYOSPHERIC INDICATORS>SNOW COVER
Land cover
Cloud
Radiometric quality
Cloud shadow
Snow
land use
COG
environmental monitoring facilities
land cover

See the referenced specification
Environment
Level 3 data products are variables mapped on uniform space-time grid scales and are the result of combining multiple scenes (e.g. S1/S10) to cover the userâs region of interest.
PROBA-V S1 TOC 100 m COG: Data corrected for atmospheric effects with the SMAC (Simplified Method for Atmosheric Corrections) algorithm, COG format - Collection 2
PROBA-V Level3 Top Of Canopy (atmosheric corrections applied) daily synthesis product at 100 m spatial resolution containing:(1) Top Of Canopy (ground surface) reflectance in the four spectral bands corresponding to the selected measurement, the atmospheric correction being performed using the SMAC procedure,(2) Normalized Difference Vegetation Index (NDVI). Other quantities derived from the surface reflectance are preserved, (3) Geometric viewing conditions, (4) Reference to date and time of the selected measurements, (5) Information on the composite status map (containing identification of snow, ice, shadow, clouds, land/sea for every pixel).The datasets are resampled to a fixed grid in the Plate CarrÃ©e (equidistant) projection at 100 m spatial resolution. For more information see https://doi.org/10.5270/PRV-7dte3c2
EARTH SCIENCE>LAND SURFACE>LAND USE/LAND COVER
EARTH SCIENCE>ATMOSPHERE>CLOUDS
EARTH SCIENCE>CLIMATE INDICATORS>CRYOSPHERIC INDICATORS>SNOW COVER
Land cover
Cloud
Radiometric quality
Shadow
Snow
land use
environmental monitoring facilities
land cover

See the referenced specification
Environment
Level 3 data products are variables mapped on uniform space-time grid scales and are the result of combining multiple scenes (e.g. S1/S10) to cover the userâs region of interest.
PROBA-V S10 TOC 1 km COG: 10-day synthesis of S1s as Maximum Value Compositing (MVC), COG format - Collection 22
PROBA-V Level3 Top Of Canopy (atmosheric corrections applied) ten-daily synthesis product at 1KM spatial resolution containing: (1) Top Of Canopy (ground surface) reflectance in the four spectral bands corresponding to the selected measurement, the atmospheric correction being performed using the SMAC procedure, (2) Normalized Difference Vegetation Index (NDVI). Other quantities derived from the surface reflectance are preserved, (3) Geometric viewing conditions, (4) Reference to date and time of the selected measurements, (5) Information on the composite status map (containing identification of snow, ice, shadow, clouds, land/sea for every pixel). The datasets are resampled to a fixed grid in the Plate CarrÃ©e (equidistant) projection at 1KM spatial resolution. For more information see https://doi.org/10.5270/PRV-7dte3c2.
EARTH SCIENCE>LAND SURFACE>LAND USE/LAND COVER
EARTH SCIENCE>ATMOSPHERE>CLOUDS
EARTH SCIENCE>CLIMATE INDICATORS>CRYOSPHERIC INDICATORS>SNOW COVER
Land cover
Cloud
Radiometric quality
Cloud shadow
Snow
land use
environmental monitoring facilities
land cover

Level 3 data products are variables mapped on uniform space-time grid scales and are the result of combining multiple scenes (e.g. S1/S5/S10) to cover the userâs region of interest.
PROBA-V S5 NDVI TOC 100 m HDF: Data corrected for atmospheric effects with the SMAC (Simplified Method for Atmosheric Corrections) algorithm, HDF format - Collection 2
PROBA-V Level3 Top Of Canopy (atmospheric corrections applied) daily synthesis product at 100 m spatial resolution containing only the Normalized Difference Vegetation Index (NDVI) at 100 m spatial resolution in equidistant Plate CarrÃ©e projection. For more info see https://doi.org/10.5270/PRV-htrh1c8
EARTH SCIENCE>LAND SURFACE>LAND USE/LAND COVER>LAND USE/LAND COVER CLASSIFICATION>VEGETATION INDEX
NDVI
HDF

The product original source is the PROBA-V mission and has been produced by VITO, see https://doi.org/10.5270/PRV-2vvxhtt.A Level2A product contains the projected Level1C data, i.e. radiometrically and geometrically corrected TOA reflectance values projected on a uniform grid, given per band/camera. The applied coordinate reference system is the âGeographic Lat/Lonâ (EPSG:4326) projection with a spatial resolution of 100 m.
PROBA-V L2A 100M ANTARCTICA COG: 100M projected segment data covering Antarctica, COG format - Collection 1
PROBA-V Level2A segments contain the Level1C data projected on a uniform 100 m grid. A PROBA-V Level2A product contains the following datasets: (1) Top Of Atmosphere reflectance in the four spectral bands corresponding to the selected measurement, without atmospheric correction being performed, (2) Geometric viewing conditions, (3) Information on the status map (containing identification of radiometric quality, snow, ice, cloud shadow, clouds, land/sea for every pixel). The datasets are resampled to a fixed grid in the Plate CarrÃ©e (equidistant) projection (EPSG:4326) at 100 m spatial resolution.

Level 3 data products are variables mapped on uniform space-time grid scales and are the result of combining multiple scenes (e.g. S1/S10) to cover the userâs region of interest.
PROBA-V S1 TOC 300 m HDF: Data corrected for atmospheric effects with the SMAC (Simplified Method for Atmosheric Corrections) algorithm, HDF format - Collection 2
PROBA-V Level3 Top Of Canopy (atmosheric corrections applied) daily synthesis product at 333 m spatial resolution containing:(1) Top Of Canopy (ground surface) reflectance in the four spectral bands corresponding to the selected measurement, the atmospheric correction being performed using the SMAC procedure,(2) Normalized Difference Vegetation Index (NDVI). Other quantities derived from the surface reflectance are preserved, (3) Geometric viewing conditions, (4) Reference to date and time of the selected measurements, (5) Information on the composite status map (containing identification of snow, ice, shadow, clouds, land/sea for every pixel).The datasets are resampled to a fixed grid in the Plate CarrÃ©e (equidistant) projection at 333 m spatial resolution.For more information see https://doi.org/10.5270/PRV-7dte3c2
Shadow
HDF

PROBA-V S1 TOA 1 km HDF: 1 km resolution best-quality daily synthesis, HDF format. Maximum Value Compositing (MVC) is applied - Collection 2
PROBA-V Level3 Top Of Atmoshere (no atmosheric corrections applied) daily synthesis product at 1KM spatial resolution containing: (1) Top Of Atmoshere reflectance in the four spectral bands corresponding to the selected measurement, without atmospheric correction being performed, (2) Normalized Difference Vegetation Index (NDVI). Other quantities derived from the surface reflectance are preserved, (3) Geometric viewing conditions, (4) Reference to date and time of the selected measurements, (5) Information on the composite status map (containing identification of snow, ice, shadow, clouds, land/sea for every pixel). The datasets are resampled to a fixed grid in the Plate CarrÃ©e (equidistant) projection at 1KM spatial resolution. For more information see https://doi.org/10.5270/PRV-q0i7fgu.
Shadow